Free Shipping Whole Malaysia (East Malaysia Free Sea Shipping) | PM Us For Better Price | Best Price in Malaysia
RM3,219.00 RM3,500.00
MARSHALL DSL40CR 40W DUAL CHANNEL TUBE GUITAR COMBO AMPLIFIER
Price RM3,219.00 RM3,500.00
Product SKU MAR-M31-DSL40CR-E
Brand MARSHALL
Availability Out Of Stock
Description
Highlight

Features:
-    Capable of conjuring any classic Marshall sound — past or present
-    2 channels — Classic Gain and Ultra Gain
-    Each channel features two modes — Clean/Crunch and OD1/OD2, respectively
-    High and low power modes allow you to dial in appropriate volume for any setting
-    Line output with Softube's accurate emulation of a Marshall 1960 cab
-    Highly effective Resonance control replaces the original's fixed deep switch
-    Refined EQ section gives you incredible tonal flexibility
-    Studio-grade digital reverb
-    Bypassable rear-panel series effects loop
-    Included 2-way footswitch for channel switching and reverb on/off

Marshall's Legendary DSL Is Back in Action
Tap into burly Marshall tone anywhere from your bedroom to the stage, with the Marshall DSL40CR tube combo amp. With per-channel Gain and Volume controls, a dedicated Resonance control, reverb, and an effects loop, the Marshall DSL40CR is ready to gig. And with its adjustable power level, you can dial in cranked-amp tones that won't wake your neighbors — or even use the Softube speaker-emulated output for direct recording and monitoring. Marshall even refined the EQ section for extremely versatile tone shaping. From glassy cleans to bone-rattling crunch to blistering high gain, your wish is the Marshall DSL40CR's command.


A 40-watt tone beast
Marshall's DSL40CR is an all-tube, twin-channel workhorse capable of conjuring any classic Marshall sound — past or present. Four ECC83s in the preamp section (in concert with the amp's gain/master volume arrangement) give you stunning tone-shaping mojo, and with two EL34s in the engine room, you have the volume to rule any club in the world.
Sporting the same tubes (minus two EL34s) and feature set as the original DSL100, this little beast has critical upgrades that give you even more control over your sound. A Resonance control (as opposed to the original's fixed deep switch) lets you dial in your preferred amount of low-end girth. You also get studio-grade digital reverb (instead of spring), high and low power settings, and a bypassable rear-panel series effects loop. The Marshall DSL40CR even has a 2-way footswitch for channel switching and reverb on/off.


Softube speaker-emulated output
Marshall has teamed up with software mavens Softube to create exceptional tones in their CODE series of amplifiers, and they've joined forces again on the DSL40CR tube combo amp. Its line output features an accurate emulation of Marshall's iconic 1960 speaker cabinet, allowing you to plug directly into a recording chain with confidence.

Tech Specs
-    Type:    Tube
-    Number of Channels:    2-channel (2 modes each)
-    Total Power:    40W (20W power setting)
-    Speaker Size:    1 x 12" Celestion V-Type speaker
-    Preamp Tubes:    4 x ECC83
-    Power Tubes:    2 x EL34
-    Reverb:    Classic, Ultra
-    EQ:    3-band EQ, Tone Shift, Resonance
-    Inputs:    1 x 1/4" (instrument), 1 x 1/8" (aux in)
-    Outputs:    2 x 1/4" (4 ohm), 2 x 1/4" (8 ohm), 1 x 1/4" (internal 16 ohm speaker), 1 x 1/4" (Softube emulated out)
-    Effects Loop:    Yes
-    MIDI I/O:    In
-    Footswitch I/O:    1 x 1/4" (channel, effects loop)
-    Footswitch Included:    Yes, 2-button footswitch (optional 6-way sold separately)
-    Construction Material:    Black Tolex
-    Power Source:    Standard IEC AC cable
-    Height:    19.29"
-    Width:    24.4"
-    Depth:    9.9"
-    Weight:    50.4 lbs.

Reviews (0)
view all
back
0
0 reviews
What's in the box

1 X MARSHALL DSL40CR 40W DUAL CHANNEL TUBE GUITAR COMBO AMPLIFIER