- Flat frequency response for accurate monitoring and mixing
- 75 Watt bi-amplified design (50+25) with active crossover
- 6.5" silver Kevlar low-frequency driver; 1" silk dome tweeter
- Elliptical waveguides for a widened sweet spot
- High-density wood cabinet with dual bass porting
- 4th-generation Rokit studio monitor with pro-grade design
- Rigid Kevlar drivers ensure low-distortion sound reproduction
- Efficient Class D power amp pumps out high-quality sound at reduced operating temperatures
- Built-in brickwall limiter provides a balanced sound, safeguards against damage, and maintains your audio’s dynamics
- Optimized high-frequency waveguide produces a wide, deep, dynamic sweet spot and incredible imaging
- Low-resonance enclosure gives you spot-on low-end performance
- Front-firing port yields excellent low-end response and straightforward speaker placement
- State-of-the-art DSP includes room correction, an LCD visual EQ, and more
- KRK app adjusts EQ settings, subwoofer levels, crossover settings, and polarity settings and aids with speaker placement and level matching
- Onboard signal generator is a must-have for calibrating your system
- Includes Iso-foam pads and an optional faceplate with a protective metal grill
- Outstanding performance and value
- 4.5" woven composite woofer, 1" ultra-low-mass silk-dome tweeter
- 50-watt Class AB amplification (25 watts per speaker)
- Balanced 1/4" TRS, unbalanced 1/8" TS, RCA, and bare-wire inputs
- 1/8" stereo headphone output
- Acoustic Tuning controls let you flatten response for mixing accuracy
- Powered:Yes
- Power Configuration:Stereo
- LF Driver Size:3.5" woofer
- LF Driver Type:Woven Composite
- HF Driver Size:1" tweeter
- HF Driver Type:Silk dome
- Total Power:50W Class AB (25W per speaker)
- Crossover Frequency:2.8kHz
- Maximum Peak SPL:100 dB SPL @ 1m
- Input Types:2 x 1/4" TRS, 1 x Dual RCA Stereo, 1 x 1/8" (aux in)
- Output Types:1 x 1/8" (headphones), Bare Wire strip (out to right speaker)
- Features:Over temperature protection, RF interference protection, High and Low frequency boost/cut
- Enclosure Type:Rear Ported
- Enclosure Material:Medium-density fiberboard, vinyl laminated
- Height:8.3"
- Width:5.6"
- Depth:6.4"
- Weight:6.4 lbs.
- Manufacturer Part Number:E 3.5
Inputs | |
1- Balanced XLR | |
1- Balanced ¼” TRS | |
1- Unbalanced RCA | |
Performance | |
Frequency Response | 48 Hz – 20 kHz |
Crossover Frequency | 3 kHz |
LF Amplifier Power | 45W |
HF Amplifier Power | 35W |
Peak SPL (@ 1 meter) | 102 dB |
LF Driver | 5.25” |
HF Driver | 1” silk dome |
Input Impedance | 10 kΩ |
Dispersion | 100 degrees horizontal by 60 degrees vertical |
User Controls | |
Volume Range | A-type taper |
MF Control | -6, 0, +6 dB |
HF Control | -6, 0, +6 dB |
Low Cut | Flat, 80 Hz, or 100 Hz |
Acoustic Space | Flat, -2 dB, or -4 dB |
Protection | |
RF interference | |
Output-current limiting | |
Over-temperature | |
Turn-on/off transient | |
Subsonic filter | |
External mains fuse | |
Power | |
100-120V ~50/60 Hz or 220-240V ~50/60 Hz | |
Cabinet | |
Vinyl-laminated, medium-density fiberboard | |
Physical | |
Width | 8” (203.2 mm) |
Depth | 9” (228.6 mm) |
Height | 11” (279.4 mm) |
Weight | 11 lbs (4.99 kg) |
- Powered:Yes
- Power Configuration:Bi-amped
- LF Driver Size:6.5"
- HF Driver Size:6.8"
- HF Driver Type:AMT tweeter
- LF Driver Power Amp:100W
- HF Driver Power Amp:50W
- Frequency Range:45Hz-22kHz
- Crossover Frequency:2.7kHz
- Maximum Peak SPL:104dB SPL
- Input Types:1 x XLR, 1 x 1/4" TRS, 1 x RCA
- Enclosure Type:Ported
- Height:13"
- Width:8"
- Depth:10.3"
- Weight:14.7 lbs.
- Powered:Yes
- Speaker Size:10"
- Driver Type:Glass Composite Cone
- Total Power :250W
- Frequency Range:20Hz-200Hz
- Crossover Frequency:50Hz
- Maximum Peak SPL:113dB
- Input Types:2 x XLR, 2 x 1/4", 1 x Dual RCA Stereo
- Output Types:2 x XLR (L/R), 1 x XLR (sub out), 2 x 1/4" (L/R)
- Other I/O:1 x 1/4" (sub bypass footswitch)
- Height:15.75"
- Width:12.60"
- Depth:15.75"
- Weight:39.46 lbs.
- Manufacturer Part Number:T10
- 4" Super-efficient Woofer and 3/4" Precision Tweeter
- 50w Custom-tuned Bi-Amp module
- AUX link option for mobile devices
- General Size: Near-field System type: Active Configuration: 2-way Drivers Low-frequency driver: 5" Mid-frequency driver: Not applicable High-frequency driver: 1" Full-range driver: Not applicable Driver type: Info not available Sound Frequency response: 49Hz - 43kHz Max peak SPL: 108 dB Amplifier class: Info not available Output power: 75W Onboard Features Input connectors: XLR, TRS, 1/8" Standby
- The Tannoy Reveal 502 is the next step in the line of professional Reveal Series studio monitors
- The powered Reveal 502 monitor's perfectly matched integrated amplifier ensures maximum efficiency and removes any need for a separate power amp
- Response is optimized for near-field operation, such as on a meter bridge or on a table on either side of your control surface
- Tannoy puts an Independent gain control on the rear panel, along with an HF trim control to allow fine tuning
- 8" Super-efficient Woofer and 1" Precision Tweeter
- 100w Custom-tuned Bi-Amp module
- AUX link option for mobile devices
2-way bass-reflex bi-amplified nearfield studio monitor with 6.5" cone woofer and 1" dome tweeter.
• 2-way bass-reflex bi-amplified nearfield studio monitor with 6.5" cone woofer and 1" dome tweeter
• 43Hz - 30kHz frequency response
• 60W LF plus 35W HF bi-amp system for high-performance 95W power amplification
• ROOM CONTROL and HIGH TRIM response controls
• XLR and TRS phone jack inputs accept balanced or unbalanced signals
2-way bass-reflex bi-amplified nearfield studio monitor with 6.5" cone woofer and 1" dome tweeter.
• 2-way bass-reflex bi-amplified nearfield studio monitor with 6.5" cone woofer and 1" dome tweeter
• 43Hz - 30kHz frequency response
• 60W LF plus 35W HF bi-amp system for high-performance 95W power amplification
• ROOM CONTROL and HIGH TRIM response controls
• XLR and TRS phone jack inputs accept balanced or unbalanced signals
2-way bass-reflex bi-amplified nearfield studio monitor with 8" cone woofer and 1" dome tweeter.
• 2-way bass-reflex bi-amplified nearfield studio monitor with 8" cone woofer and 1" dome tweeter
• 38Hz - 30kHz frequency response
• 75W LF plus 45W HF bi-amp system for high-performance 120W power amplification
• ROOM CONTROL and HIGH TRIM response controls
• XLR and TRS phone jack inputs accept balanced or unbalanced signals
2-way bass-reflex bi-amplified nearfield studio monitor with 8" cone woofer and 1" dome tweeter.
• 2-way bass-reflex bi-amplified nearfield studio monitor with 8" cone woofer and 1" dome tweeter
• 38Hz - 30kHz frequency response
• 75W LF plus 45W HF bi-amp system for high-performance 120W power amplification
• ROOM CONTROL and HIGH TRIM response controls
• XLR and TRS phone jack inputs accept balanced or unbalanced signals
- 4" woofers and high-resolution tweeters
- Each speaker is driven by an 8W amplifier
- Dedicated volume, bass and treble controls for more flexibility
- Separately adjustable 1/4" TRS microphone input mixable with stereo inputs
- 1/8" TRS headphone connector with auto-mute loudspeaker function
- Magnetically shielded for placement near computer monitors
- 40W RMS — twice as loud as comparably-sized speakers
- 50 Hz to 20kHz frequency range with bass reflex port for superior low-end performance
- Two-way 2x3” neodymium tweeters for crisp clear high frequencies
- Advanced digital crossovers for incredible midrange detail. Battery powered with up to 10 hours listening time
- iRig circuit for use as a guitar/mic interface for iPhone and iPad
- Nearfield studio monitors that are perfect for mixing and critical listening
- Flat frequency response is idea for critical listening, mixing, and editing
- Layered 5" glass aramid fiber low-frequency driver and soft dome tweeter provide smooth sound with minimal distortion
- Class A/B amplifier with integrated limiter delivers consistent sound that won't overload
- Front-slotted bass port and frequency controls reduce boundary coupling and accommodate for less-than-idea acoustics
- Professional connectivity accommodate all kinds of systems
- The perfect complement to KRK ROKIT and VXT studio monitors (4-8")
- Works well with any system
- Takes mixes from good to great
- 10" glass-aramid woofer handles high SPLs without distortion
- Extended low end sheds light on problem bass frequencies
- Clean, tight, powerful bass enhances everyday listening
- Adjustable crossover customizes sub response
- Flexible positioning - accurate even placed off to the side
- Sensitivity switch for use with pro or consumer audio equipment
- Ground lift and polarity switch overcome setup issues
- Footswitchable bypass (footswitch not included; sold separately)
- Frequency response: 31Hz-110Hz
- Frequency range: 28Hz-156Hz
FEATURES
- 4th-generation ROKIT studio monitor with pro-grade design
- Rigid Kevlar drivers ensure low-distortion sound reproduction
- Efficient Class D power amp pumps out high-quality sound at reduced operating temperatures
- Built-in brickwall limiter provides a balanced sound, safeguards against damage, and maintains your audio’s dynamics
- Optimized high-frequency waveguide produces a wide, deep, dynamic sweet spot and incredible imaging
- Low-resonance enclosure gives you spot-on low-end performance
- Front-firing port yields excellent low-end response and straightforward speaker placement
- State-of-the-art DSP includes room correction, an LCD visual EQ, and more
- KRK app adjusts EQ settings, subwoofer levels, crossover settings, and polarity settings and aids with speaker placement and level matching
- Onboard signal generator is a must-have for calibrating your system
- Includes attached Iso-foam pads
- Optional faceplate with protective metal grill is available separately
- Frequency Response: 36Hz - 40KHz
- Max SPL: 111 dB
- Power Output: 203 Watts
- Input Impedance: 5.12KΩ Balanced
- Balanced TRS/XLR Combo Jacks
- Dimensions: 15.75" / 400 mm (H) X 10.47" / 266 mm (W) X 12.17" / 309 mm (D)
- Weight: 22.6 lb / 10.25 kg
FEATURES
- 4th-generation Rokit studio monitor with pro-grade design
- Rigid Kevlar drivers ensure low-distortion sound reproduction
- Efficient Class D power amp pumps out high-quality sound at reduced operating temperatures
- Built-in brickwall limiter provides a balanced sound, safeguards against damage, and maintains your audio’s dynamics
- Optimized high-frequency waveguide produces a wide, deep, dynamic sweet spot and incredible imaging
- Low-resonance enclosure gives you spot-on low-end performance
- Front-firing port yields excellent low-end response and straightforward speaker placement
- State-of-the-art DSP includes room correction, an LCD visual EQ, and more
- KRK app adjusts EQ settings, subwoofer levels, crossover settings, and polarity settings and aids with speaker placement and level matching
- Onboard signal generator is a must-have for calibrating your system
- Includes Iso-foam pads and an optional faceplate with a protective metal grill
- 3.5-inch (89 mm) woven composite low-frequency transducer
- 1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
- Rear-firing acoustic port for superior bass-frequency reproduction
- Optimized, resonance-suppressing internal bracing
- High- and low-frequency tuning controls
- Front-panel Volume control for speakers and headphone amplifier
- 50 watt (25W/side), Class AB biamplification
- RF interference, output current limiting, over-temperature, transient, and subsonic protection
- Amplifier “soft start” feature eliminates popping on power-up
- Internal power supply with IEC connector
- Power switch with on/off LED
- Balanced ¼-inch TRS, unbalanced 1/8-inch stereo, and RCA inputs
- Integrated stereo headphone amplifier with front-panel 1/8-inch output
- 2-way active studio monitors with rear-vented, precision-tuned port enclosures (sold in stereo pairs)
- Bluetooth connectivity to connect wireless music sources
- 4-inch copolymer woofers
- 1-inch silk dome tweeters
- 20 watts per channel RMS, 40 watts per channel Peak
- Front panel LED indicator, level control, headphone output and stereo input
- Back panel Bluetooth pairing button, RCA inputs, passive monitor terminals and AC power connector
- AV shielded for multimedia applications
- Passive crossover design for linear response from bottom to top
- Sleek all-black satin vinyl finish
- Metal grills protect woofer and tweeter components
- Speaker cable included